High-power large cold milling machine. 2,000 mm milling width, 330 mm max depth, 146-cutter drum. Cummins 563 kW diesel engine — 26 percent more power than the 447 kW XM2005K sibling on the same drum specification. China Stage III emission. 30,500 kg working weight, 28,500 kg in transport. Transport dimensions 12,641 mm long, 2,712 mm wide, 3,000 mm tall. For projects where deep-cut work, hard-asphalt cutting, or daily production rate is the binding constraint.
The XM2005KIII is the high-power 2 m XCMG cold milling machine — 563 kW Cummins diesel engine, 26 percent more rated power than the 447 kW XM2005K sibling, on the same 2,000 mm milling width, 330 mm max depth, and 146-cutter drum. CN Stage III emission certification.
Same 30,500 kg working weight and 28,500 kg transport weight as the XM2005K. Transport dimensions 12,641 mm long, 2,712 mm wide, 3,000 mm tall.
The extra 116 kW of engine power matters when daily production rate, deep-cut work, or hard-asphalt cutting is the binding constraint. Use the XM2005KIII when the project needs the headroom for full-depth 330 mm passes on hard or aggregate-rich asphalt, or when keeping the drum loaded at higher advance speeds drives the cost-per-meter calculation. Use the lower-power XM2005K (Stage III) sibling for routine overlay removal where 447 kW is enough and the extra fuel burn of the 563 kW engine is not justified.
Typical use: large-area asphalt excavation and renovation on highways, urban roads, airport runways, freight yards, parking lots; cleaning bitumen waves, netting cracks, wheel tracks; groove excavation; fine concrete cutting; milling of misaligned pavement layers.
