ME
ME Equipment
Authorized XCMG Dealer New Original XCMG Parts Support

XCMG XGS24ACK-Li Electric Telescopic Boom Lift

24 m Lithium-Battery Electric Telescopic Boom Lift

Share:
Ask AI:
NewAvailableYear 2026

Lithium-battery electric self-propelled telescopic boom lift, 24.5 m maximum working height and 22.5 m platform height. 17.35 m maximum horizontal working range. Dual-tier 300 kg unlimited / 460 kg limited lift capacity — the 460 kg inner-zone rating carries crew plus tools and small fixtures. 3-person platform 2440 x 910 x 1150 mm. 12.96 ton unit weight. 6 km/h stowed drive, 45 percent gradeability. Non-marking off-road tires and axle balancing as standard. Lithium-ion battery pack — longer cycle life and faster charging versus lead-acid.

The XCMG XGS24ACK-Li is a lithium-battery electric self-propelled telescopic boom lift in the 24-meter working height class. Maximum platform height is 22.5 m, working height 24.5 m, horizontal working range 17.35 m. Dual-tier lift capacity: 300 kg unlimited across the full envelope; 460 kg limited within the inner reach zone, supporting tools and small fixtures.

Unit weight is 12.96 tons; stowed dimensions 9840 x 2450 x 2830 mm, transport profile 9550 x 2450 x 3000 mm. The 2440 x 910 x 1150 mm platform fits up to 3 occupants. Drive speed 6 km/h stowed and 0.6 km/h elevated. Gradeability 45 percent (24 degrees), 300 mm ground clearance, turning radius 3155 mm inside / 6360 mm outside. Telescopic boom luffing range -4 to +73 degrees, with a 1.85 m flying jib (-65 to +70 degrees). 360-degree turntable, 160-degree platform rotation.

Lithium-ion battery powerpack delivers longer cycle life and faster charging compared with lead-acid alternatives, with no on-shift fluid topping. Zero emission and low noise for indoor finished-interior work.

Model XGS24ACK-Li
Chat with Patrick
XCMG XGS24ACK-Li Electric Telescopic Boom Lift — 24.5 m working height, 300/460 kg lift capacity, lithium battery
XCMG XGS24ACK-Li
CIF Quote Available
Key Parameters

Core Specifications

Max. Working Height
24.5 m
Max. Platform Height
22.5 m
Max. Working Range
17.35 m
Lift Capacity
300 kg unlimited / 460 kg limited
Why This Machine

Product Features

Five aspects of the XGS24ACK-Li that fit it to 24-meter indoor/outdoor aerial work with rental-fleet duty cycles: working envelope, dual-tier 300/460 kg capacity, lithium-ion battery, non-marking off-road tires with axle balancing, and parts compatibility across the XCMG XGS-ACK fleet.

01
Configuration

24.5 m working height with 17.35 m horizontal range

22.5 m maximum platform height, 24.5 m maximum working height, 17.35 m maximum working range. Telescopic boom luffing range -4 to +73 degrees plus 1.85 m flying jib (-65 to +70 degrees). 360-degree turntable rotation, 160-degree platform rotation. Step up in horizontal reach from the 22-meter XGS22ACK (15.4 m).

02
Capacity

Dual-tier 300 kg unlimited / 460 kg limited capacity

300 kg lift capacity rated unlimited across the full working envelope plus 460 kg rated within the limited inner-reach zone. The 460 kg tier carries a 3-person crew plus tools and small fixtures when staying inside the inner zone — useful for fit-out work, signage installation, and mechanical pre-assembly tasks. Standard 300 kg envelope keeps simple two-person crews on full reach without zone checks.

03
Powertrain

Lithium-ion battery pack — longer cycle life, faster charging

Lithium-ion battery powerpack — longer service life and faster recharge cycle versus lead-acid alternatives, no on-shift fluid topping. Suited to rental fleet operators tracking total cost over the battery's useful life, and to multi-shift indoor work where charge cycle time directly drives daily utilization.

04
Mobility

Non-marking off-road tires with axle balancing system as standard

Standard fit of non-marking off-road tires plus an axle balancing system. Same tire set drives outdoor construction sites with uneven surfaces and operates inside finished interiors without leaving marks. 45 percent (24-degree) gradeability, 300 mm ground clearance, 3155 mm inside / 6360 mm outside turning radius.

05
Parts Support

Parts compatibility across the XCMG XGS-ACK fleet

Boom sections, platform components, hydraulic valves, and electrical control elements share core part numbers across the XGS-ACK lineup (XGS18ACK through XGS45ACK-Li). Lower inventory carrying cost for rental fleet operators running mixed-height XCMG rosters. Genuine XCMG parts and service available through me-equipment.com's authorized dealer channel.

Technical Parameters

Full Specification Sheet

ParameterUnitValue
Max. working height mm 24500
Max. platform height m 22.5
Max. working range m 17.35
Lift capacity kg 300 (unlimited) / 460 (limited)
Weight kg 12960
Max. occupants - 3
Overall dimensions (stowed) mm 9840 x 2450 x 2830
Overall dimensions (transport) mm 9550 x 2450 x 3000
Platform dimensions mm 2440 x 910 x 1150
Wheelbase mm 3000
Fly jib length mm 1850
Ground clearance mm 300
Telescopic boom luffing range - -4 to +73 deg
Flying jib luffing range - -65 to +70 deg
Turntable rotation - 360 deg
Platform rotation - 160 deg
Drive speed (stowed) km/h 6
Drive speed (up/extended) km/h 0.6
Turning radius (inside/outside) mm 3155 / 6360
Max. gradeability - 45% (24 deg)
Battery type - Lithium-ion

Talk To Alex About Your Next Order

Tell us your spec, budget, and destination port. You'll get a matching shortlist with photos, working videos, and pricing within 24 hours.

A
Direct To Sales

Get Your Quote

Alex replies within 24 hours with photos, videos, and pricing.

Your information stays private. Never shared with third parties.