Multi-functional Green Maintenance Truck — Cab-Operated Trimmer
Truck-mounted multi-functional green maintenance trimmer for vegetation along highways, expressways, provincial roads, and gardening or landscaping projects. Trimming breadth 1500 to 2300 mm, trimming height 2800 mm for horizontal trimming and 4000 mm for vertical trimming, trimming width 0 to 3500 mm. Trimming speed 10 to 15 km/h. Overall dimensions 5995 × 1920 × 2870 mm. Performs flat, vertical, and oblique shear operations from the cab — replaces manual roadside-vegetation labor and removes worker exposure to roadside traffic.
The XCMG XLH405 is a multi-functional green maintenance truck for trimming roadside vegetation along highways, expressways, provincial roads, and in gardening or landscaping projects. Replaces manual roadside-vegetation labor with a truck-mounted trimmer that handles flat shear, vertical shear, and oblique shear from the cab.
Trimming breadth 1500 to 2300 mm. Trimming height 2800 mm in horizontal trimming mode, 4000 mm in vertical trimming mode. Trimming width 0 to 3500 mm — covers from at-cab-side trimming to extended reach over the road shoulder. Trimming speed 10 to 15 km/h.
Overall dimensions 5995 × 1920 × 2870 mm (length × width × height). Trimmer is customizable for specific operator requirements. Removes worker exposure to roadside traffic during manual shear work — fit for highway operators with safety regulations restricting on-foot roadside crews and for green-space contractors with extensive periodic shear schedules across long road networks.
Five aspects of the XLH405 that fit it to highway and landscaping vegetation maintenance work: three-shear-mode trimmer, 4000 mm vertical reach, 3500 mm horizontal reach, cab-operated worker-safety design, and trimmer customization.
Single trimmer head handles flat shear (horizontal hedge top), vertical shear (face-side hedge cut), and oblique shear (angled cut on planted slopes). No tool change between cut profiles — operator switches modes from the cab during the work pass.
4000 mm trimming height in vertical trimming mode. Reaches the upper face of mature roadside hedges, noise barriers with planted face, and tall median planting on motorways — eliminates the manual aerial-platform crews otherwise needed to maintain elevated planting along divided highways.
Trimming width 0 to 3500 mm. 0 mm corresponds to at-cab-side trimming with the head retracted; 3500 mm reaches across the road shoulder or median to vegetation set back from the driving lane. Trimming breadth 1500 to 2300 mm covers wide-hedge cut profiles.
Operator controls the trimmer from the truck cab. Removes worker exposure to roadside traffic during manual shear work — fit for highway operators with safety regulations restricting on-foot roadside crews and for projects where lane closures for manual crews would be prohibitively expensive.
Trimmer head customizable to the operator's specific work requirements per the XCMG spec sheet. Lets buyers tune cut-profile, blade geometry, and reach configuration to local roadside planting standards rather than accept a fixed factory configuration.
| Parameter | Unit | Value |
|---|---|---|
| Trimming breadth | mm | 1500 - 2300 |
| Trimming height | mm | 2800 (horizontal) / 4000 (vertical) |
| Trimming width | mm | 0 - 3500 |
| Trimming speed | km/h | 10 - 15 |
| Overall dimensions (L×W×H) | mm | 5995×1920×2870 |
Tell us your spec, budget, and destination port. You'll get a matching shortlist with photos, working videos, and pricing within 24 hours.
