XR150D

XR150D Home>New equipment>Earthmoving equipment>Rotary drilling rig

ImImports Kawasaki hydraulic components enable power systems reasonablly matched and high efficiency of construction; Scalable dedicated rotary drilling chassis ensures the stability of the overall work; Dual box luffing mechanism make transportation easier and also improve reliability; Imported Cummins engine, the design of rate transfering enables fuel efficient; The standard centralized lubrication system provides more convenient maintenance.

序号 NO.	名称 Name		单位 Unit	参数值 Parameters
1	最大钻孔直径 Max. drilling diameter		mm	Æ1300
2	最大钻孔深度 Max. drilling depth		m	38 (4节摩阻) —标配 38(4-section of friction) (standard) 48 (5节摩阻) —选配 48(5-section of friction) (optional) 38（机锁4节）—选配 38(4-section of mechanical interlock ) (optional)
3	容许安全钻孔作业范围(距回转中心) Safe operation range(from rotarying centre)		mm	3150～3550
4	工作状态钻机尺寸（长×宽×高） Dimension in working condition(L×W×H)		mm	7122×4200×17250
5	运输状态钻机尺寸（长×宽×高） Dimension in transportation condition(L×W×H)		mm	12300×3200×3060
6	整机重量（标准配置下不含钻具） Overall drilling weight(drilling tools not included)		t	45.5
7	发动机 Engine	发动机型号 Engine model		康明斯 B5.9-C CUMMINS B5.9-C
		发动机额定功率/转速 Engine rated power/rotary speed	kW	133 /2000r/min
		发动机最大扭矩 Max. Torque of engine	N.m	553 /1500r/min
8	液压系统 Hydrulic system	主泵最大工作压力 Max. pressure	Mpa	32
9	动力头 Rotary drive	动力头的最大扭矩 Max.output torque	kN.m	150
9	动力头 Rotary drive	动力头的转速 Rotary speedRotary speed	rpm	6～28
10	加压油缸 Pull-Down clinder	加压油缸最大加压力 Max. pull-down piston push	kN	120
		加压油缸最大提升力 Max. pull-down piston pull	kN	160
		加压油缸行程 Max. pull-down piston stroke	mm	3500
11	主卷扬 Main winch	主卷扬提升力 Max. pulling force	kN	145
		主卷扬最大单绳速度 Max. wire speed	m/min	75
		主卷扬钢丝绳直径 Wire diameter	mm	26
12	副卷扬 Auxiliary winch	副卷扬提升力 Max. pulling force	kN	50
		副卷扬最大单绳速度 Max. wire speed	m/min	70
		副卷扬钢丝绳直径 Wire diameter	mm	16
13	钻桅 Mast	桅杆左/右倾角 Left/ right Side	°	3 / 3
13	钻桅 Mast	桅杆前倾角 Forwards	°	5
14	转台回转 Slewing bearing	转台回转角度 Slewing bearing angle	°	360
15	行走 Runing	整机最大行走速度 Max. complete device running speed	km/h	3.2
15	行走 Runing	整机最大爬坡度 Max. complete device grade ability	%	40
16	履带 Track	履带宽度 Track width	mm	800
		履带外宽（最小-最大） Outside width(min-max)	mm	3200～4200
		履带纵向两轮中心距 Distance between two wheels longitudinally	mm	3843
		平均接地比压 Average grouning specific pressure	KPa	70.5