Slab Mobilift with double cantilevers                                         Home>New equipment>Crane products>Gantry crane

Slab Mobilift with double cantilivers Chinese Patent No.: ZL2005 2 0127691.8 

>Truck crane >All terrain crane >Rough terrain crane >Truck mounted crane >Crawler crane >Telescopic crawler crane >Pipelayer >Port crane >Tower crane >Gantry crane >Telehandler >Hoisting equipment

Feature Parameter Back to the list --Check for other models-- Launching Gantry 900ton with shorter bridge 900 Ton Special Launching Carrier for passing through tunnel Special Launching Carrier 900 Ton with bridge 900 ton Launching Gantry suitable for going through tunnel Launching gantry in span by span Span by span Launching Gantry 150x1600 Ton Launching Gantry 450 ton Hydraulic flat trolley Tyre Trolley(17 axles) Tyre Trolley(16 axles) Flat Trolley 900 Ton Special Carrier Straddle Carrier/Mobilift Steel Ingot Carrier 60 ton Straddle Carrier 60 ton for handling containers Steel Carrier 40 ton Marine Hoist Slab Mobilift with double cantilevers Telescopic spreader for straddle carrier(50 ton) Introduction The purpose of this machine’s design is to reduce the operating time and costs in moving slabs. All the operational processes are very easy, so that we can reduce the operator display and increase the operator safety. With a view to the working conditions, we chose the top-ranking parts and materials.when we designed and manufactured this machine. So the service life can be extended. And the maintenance time is economy. Design general data    ·Max load under the spreader: 10 metric ton. ·Max capacity on the spreader: 12 ton ·Number of lifting points: 4 ·Capacity on each hoisting point: 3 ton. ·Clear inside width (two dimensions): according to the practical requirement ·Gauge (two dimensions): according to the practical requirement ·Spreader longitudinal slope ±10° ·Spreader cross fall ±10° ·Spreader provided with n° 4 gripping devices with a max thickness of 15~20 mm; the movement of the grips is hydraulic with rotation around and vertical pin ·Spreader with hydraulically assisted longitudinal ·Industrial tyres: n° 4 18.00 R25 ·Mobile trolleys: n° 2 ·Trolleys rolling travel: ± 2400 mm ·Trolleys speed: 15 m/min. ·Hoisting speed when loaded: 5 m/min ·Hoisting speed when unloaded: 10 m/min ·Traveling speed when loaded on flat ground (cement or tarmac): variable 0÷4 km/h ·Traveling speed when loaded on 5% slope (cement or tarmac): variable 0÷2 km/h ·Affordable slope: 5% ·Approximate weight of the machine (unloaded) : 19 ton The frame of the Mobilift is provided with a hinge so as to have an isostatic support on the four tyres and have maximum traction force. The Mobilift can work under  different levels between the right frame and the left frame; and the mobile trolley can work under the above-mentioned status (grade and the force of friction is increased) As an option, the gauge of the Mobilift can be modified from smaller distances to bigger distances in an easy way with a technical solution adopted by EDEN TECHNOLOGY (this system has been patented: with that system, the variation of the gauge is a 2 (two) minutes matter, without need for using any extra tool. 1/F, Enterprise Building 228-238, Queen's Road Central,  Hongkong Copyright © 2015 MINING AND ENGINEERING EQUIPMENT LIMITED, All rights reserved.