RIM SS(Single-side formwork system)                     Home>Service>Building formwork>Formwork systems

>Scaffoldings >Shoring props >H20 timber beam >Tower system >Formwork systems >Accessories >Projects

Feature Parameter Back to the list --Check for other models-- RIM TTF20(Table formwork) RIM STF20(Slab formwork) RIM VTF120(Wall formwork system) RIM SCS80/120(Self-climbing formwork system) RIM CB240(Climbing formwork system) RIM CB-180(climbing formwork system) RIM DB240(Dam formwork system) RIM DB-180(Dam formwork system) RIM SS(Single-side formwork system) RIM ACF-H20(curve formwork system)

RIMMCA Single Side Formwork SSF is designed for the project which is not possible to place a form-tie through the formwork elements or panels to anchor them to the opposing formwork. "Single Side Formwork SSF " enable the concrete forces to be safely transferred. Its max pouring height can be up to 8.0m high.

Advantages:

1. Tensile forces are reliably transferred by means of diagonal anchors.

2. Modular vertical stacking facility. Optimum adaptability to the required pourheight, from 4.00 m up to max. 8.0 m.

3. Adapts to uneven ground by means of spindles with articulated footplates.

4. Adjusting for the different fresh-concrete pressures required is easy and economical�Csimply increase or decrease the spacing between the supporting frames, as appropriate.

5. The high-speed repositioning can be by crane or by traveling unit on rails or
rollers.